Fan header convertor for NOCTUA NF-A4x10 5V

[SunWukong]

I am also a fan of PWM fans.

Control of 5V PWM fans, manually, with script and automatically by kernel

The topic of cooling has been addressed here in the forum on various occasions. Some consider fan-assisted cooling to be necessary, others swear by passive cooling and still others find the topic overrated and consider cooling of the VF2 to be unnecessary. Differing opinions on this subject are normal and perfectly fine. Here I would like to address only the first group and go through the possibilities of temperature-regulated PWM control together with you. Those who are concerned about cooling…

Using Odroid XU4 fan on VisionFive 2

It seems the Odroid XU4 fan is mostly compatible with the VisionFive 2: [IMG_0480] I had to remove the connector and replace it with one to fit the VisionFive 2, but it seems to be working well after doing that. I made some further notes on it in this post: VisionFive 2 hardware setup and costings – Graham Markall The idle temperature seems to have dropped down from about 50 deg C to about 30 deg C with the fan running. I have not yet tested it under load but will post some more details onc…